|
Briggs Angle Motor Mount 1 1/8" rails (SKU: FK1100)
|
Briggs Angle Motor Mount 1 1/4" rails (SKU: FK1250)
|
Briggs Center Brace for mount (SKU: FK1103)
|
 Briggs Flat Motor Mount ~ CHECK This Looow Price... (SKU: FK578)Flat plate motor mounts allow the motor to be attached to our American sub-plate or our International sub-plate (or to most sub-plates offered today).
~~~Build that modified you've been wanting~~~~
|
|
Chain, #35 Fun Kart 3 feet length (SKU: DRO17)
|
 Clamp Brackets With Extension for 1 1/4" Tube (SKU: FK3035)"Our Clamp brackets have superior clamping power. Perfect for mounting exhaust systems, weights, number panels, and body work.. The special design allows the brackets to firmly grip even severly undersized tubing. Each assembly is machined as a set to guarantee a perfect fit. Made from ¾ inch square 6061-T6 aluminum . Complete with hardware."
|
Clamp Brackets With Extension for 1 1/8" Tube (SKU: FK3030)"Our Clamp brackets have superior clamping power. Perfect for mounting exhaust systems, weights, number panels, and body work.. The special design allows the brackets to firmly grip even severly undersized tubing. Each assembly is machined as a set to guarantee a perfect fit. Made from ¾ inch square 6061-T6 aluminum . Complete with hardware."
|
Clamp Brackets With Extension for 1" Tube (SKU: FK3010)"Our Clamp brackets have superior clamping power. Perfect for mounting exhaust systems, weights, number panels, and body work.. The special design allows the brackets to firmly grip even severly undersized tubing. Each assembly is machined as a set to guarantee a perfect fit. Made from ¾ inch square 6061-T6 aluminum . Complete with hardware."
|
|
Clamp Brackets With Extension for 3/4" Tube (SKU: FK3015)"Our Clamp brackets have superior clamping power. Perfect for mounting exhaust systems, weights, number panels, and body work.. The special design allows the brackets to firmly grip even severly undersized tubing. Each assembly is machined as a set to guarantee a perfect fit. Made from ¾ inch square 6061-T6 aluminum . Complete with hardware."
|
Clutch, 5 HP 4 cycle, 12T, 3/4" Bore (SKU: FU001)
|
Mount clamp for FK1100 & FK1250 (SKU: FK1104)Use this for the Briggs FK1100 motor mount.
|
 Publication - "Dynamics of Speed" (SKU: DOS 0001)"Dynamics of Speed" is a reference book specifically for karting, a worthy addition to your library.
|
 Sprockets, #35 ~ 53T to 63T (SKU: DR001)Brand name sprockets, how many teeth do you need?
Note number of teeth wanted on order form...
|
Sprockets, #35 ~ 64T - 78T (SKU: DR002)Brand Name Sprockets, larger sizes.. Note number of teeth wanted on the order form.
|
 Sub-plate, for 1 1/8” tubes, American spacing (SKU: FK550)These sub-plates allow mounting of any of our engine mounting platforms to American style (2.75 inch spaced) frames. The sub-plate is CNC milled from 6061-T6 aluminum. It comes complete with our two bolt billet clamps and all hardware. FK 550 and FK 558 fit standard 1 1/8” tube diameter. The 1558 is machined to fit a 1 ¼” tube diameter.
|
Sub-plate, for 1 1/8” tubes, International spacing (SKU: FK558)These sub-plates allow mounting of any of our engine mounting platforms to International style (3.5 inch spaced) frames. The sub-plate is CNC milled from 6061-T6 aluminum. It comes complete with our two bolt billet clamps and all hardware. 550 and 558 fit standard 1 1/8” tube diameter. The 1558 is machined to fit a 1 ¼” tube diameter.
|
|
Sub-plate, for 1 ¼” tubes, International spacing (SKU: FK1558)These sub-plates allow mounting of any of our engine mounting platforms to American style (2.75 inch spaced) or International style (3.5 inch spaced) frames. The sub-plate is CNC milled from 6061-T6 aluminum. It comes complete with our two bolt billet clamps and all hardware. 550 and 558 fit standard 1 1/8” tube diameter. The 1558 is machined to fit a 1 ¼” tube diameter.
|
TAG Mount (SKU: FK332A32)
|
 TCI Hold Down, plain (SKU: FK1277)"Designed specifically for holding Yamaha TCI ignition units in place, the Fast Karts TCI Hold Down prevents broken hold down ears. This is made of 6061-T6 aluminum."
|
 TCI Hold Down, Special Vented - RED (SKU: FK1200)"The Special TCI Hold Down features a fully finned heat sink top for added cooling, made from 6061-T6 aluminum. Flow through design allows complete air circulation. The Special TCI Hold Down is polished and anodized Racing Red. Fits Yamaha engines."
|
 Yamaha 3 rd Bearing Plate Assembly, (fits FK 515 & FK595 Mounts) (SKU: FK525 )"Replacement Bearing Plate for Assembly FK515 & FK595 , includes bearing."
|
 Yamaha 3rd Bearing spacer plate (SKU: FK518)Bearing plate spacer to use with 3rd bearing mount for extended crank nut. (FK595 & FK515 for Yamaha)
|
 Yamaha Engine Mount, 3rd Bearing Support (SKU: FK515)The Fast Karts 3rd Bearing Support/Flat Motor Mount comes complete with all necessary hardware.
Replacement bearings and vertical supports are available.
|
 Yamaha Engine Mount, 3rd Bearing Support (SKU: FK595)The Fast Karts 3rd Bearing Supports are CNC machined to fit perfectly between your Yamaha engine and angled motor mount (like the Fast Karts Part 5731), but it is also precision drilled and counterbored to mount flat on a sub-plate (like the Fast Karts Part 550 & 558) for a lower center of gravity.
|
 Yamaha Flat Motor Mount (SKU: FK551)Flat plate motor mounts allow the motor to be attached to our American sub-plate or our International sub-plate (or to most sub-plates offered today).
|
 Yamaha Motor Mount - 10 degree (SKU: FK573)"10 Degree Yamaha Motor Mount, CNC milled from billet, 6061-T6 aluminum. Lighter than most other 10 deg. Mounts. Designed to work with FK 550 & FK 558 sub-plates. Comes with necessary hardware. (Shown w/sub-plate, not included)"
|
 Yamaha Replacement 3rd Bearing for FK 515 Assembly (SKU: FK519)Replacement Bearing for Assembly FK515
|
 Yamaha Spacer Plate (SKU: FK600 )Fast Kart Yamaha Spacer Plate provides the extreme racer a tool to use for clearance problems that may accompany their engine. The spacer plate can be mounted above or below the FK515 (3rd Bearing Support) or other engine mounts. The plate is CNC milled from 3/4 inch thick 6061-T6 aluminum.
|
