 Autolite 411 Spark Plug (SKU: SP001)Use this spark plug in Briggs stock classes.
|
 Briggs Animal Carb Air Cleaner (SKU: AFR110)Keep your 'Animal' breathing free & clean.
|
 Briggs Carb Mixture Screw Extension (SKU: FK810)The precision Mixture Screw Extender allows you to easily tune your kart’s carburetor while in the pits or during the race. The extension has a small locator pin so you can determine the mixture position without looking. Mixture screw extenders are made from 6061-T6 aluminum and come complete with two sets of hardware.
|
 Briggs Carb to Tank Gasket (SKU: BR555084)Seal the carb flange to tank
|
 Briggs Carburetor Support (SKU: FK280)Helps to prevent broken gas tank flanges. The Fast Karts manufactured Briggs Carburetor Support helps prevent failure of the carburetor gas tank mounting flange. Two unique support features milled into the solid aluminum bracket transfer the weight of the tank to the carburetor body, not to the mounting flange.
|
 Briggs Flywheel Remover (SKU: FK875)"For Briggs & Stratton Engines The Fast Karts flywheel tool makes removing the flywheel easy. First remove the flywheel nut and screw the tool onto the crankshaft. Unscrew the tool ½ turn, hold the flywheel with one hand and strike the tool with a hammer. The impact will cause the flywheel to “pop off” the tapered shaft. We make our tool from a high chrome steel and have it plated for years of hard use."
|
 Briggs Magnetic Drain Plug ~ Bargin Day... (SKU: FK860)
|
 Briggs Set of Jets (SKU: BR078)Included are jets from 46 to 54 in a storage block.
|
 Briggs Stock Carb Diaphragm (SKU: BR555119)One very important part of fuel delivery.
|
 Briggs Stock Exhaust Gasket (SKU: BR056)Effective sealing at the exhaust port.
|
 Briggs Stock Head Gasket (SKU: BR555066)Use with confidence...
|
 Briggs Stock Intake Gasket (SKU: BR27909)This fits between the carb & the block.
|
 Chain Master Link #35 (SKU: E384)
|
 Chain, #35 space chain for KARTING (SKU: DR015)Each box contains 96 links (about 3' in length). This is manufactured by EK, a leader in quality roller chain production.
|
 Chain, 219 Kart Racing - 114 links (SKU: DR150)D.I.D. 219 Gold Hi-Performance Kart Racing Chain, 114 links.
|
Chain, #35 Fun Kart 3 feet length (SKU: DRO17)
|
 Chain, #35 Space Chain, 10 feet (SKU: E400)
|
 Clutch Puller, Universal ~ very good tool.. (SKU: FK831)The universal clutch puller removes both long & short nose clutches. Counterbored to accept crankshaft end on short nose clutches. Extra long oversized screw. Zink plated for corrosion resistance. Undercut to prevent damage to clutch threads.
|
Clutch, MaxTorque 4 cycle (SKU: MTSS1041)
|
 Filter, Open Top Foam (SKU: EA001)This is for closed end filters.
|
 Magneto Rotor Puller (SKU: FK444)The “long arm” Magneto Rotor Puller allows easy removal of the Yamaha magneto rotor. One tool does the work of a rotor holder AND a rotor puller! The handle extension prevents the tool from rotating during use. Brightly Zinc plated for years of hard use. Comes with extra long screws.
|
SPROCKET HUB, 1" Axle (SKU: DRO19)
|
 TCI Hold Down, plain (SKU: FK1277)"Designed specifically for holding Yamaha TCI ignition units in place, the Fast Karts TCI Hold Down prevents broken hold down ears. This is made of 6061-T6 aluminum."
|
 TCI Hold Down, Special Vented - RED (SKU: FK1200)"The Special TCI Hold Down features a fully finned heat sink top for added cooling, made from 6061-T6 aluminum. Flow through design allows complete air circulation. The Special TCI Hold Down is polished and anodized Racing Red. Fits Yamaha engines."
|
 Yamaha Magneto Nut - Aluminum (SKU: FK90179)"The Fast Karts Yamaha Magneto Nut is a direct replacement for the Steel Yamaha Nut. The aluminum nut provides a lightweight replacement for its heavier steel counter part (a 65% reduction in weight), enabling faster RPM recovery."
|
|
|
|
