| • |
 Use this spark plug in Briggs stock classes. |
More info ›› |
| |
| • |
 Keep your 'Animal' breathing free & clean. |
More info ›› |
| |
| • |
 The precision Mixture Screw Extender allows you to easily tune your kart’s carburetor while in the pits or during the race. The extension has a small locator pin so you can determine the mixture position without looking. Mixture screw extenders are made from 6061-T6 aluminum and come complete with two sets of hardware. |
More info ›› |
| |
| • |
 Seal the carb flange to tank |
More info ›› |
| |
| • |
 Helps to prevent broken gas tank flanges. The Fast Karts manufactured Briggs Carburetor Support helps prevent failure of the carburetor gas tank mounting flange. Two unique support features milled into the solid aluminum bracket transfer the weight of the tank to the carburetor body, not to the mounting flange. |
More info ›› |
| |
| • |
 "For Briggs & Stratton Engines The Fast Karts flywheel tool makes removing the flywheel easy. First remove the flywheel nut and screw the tool onto the crankshaft. Unscrew the tool ½ turn, hold the flywheel with one hand and strike the tool with a hammer. The impact will cause the flywheel to “pop off” the tapered shaft. We make our tool from a high chrome steel and have it plated for years of hard use." |
More info ›› |
| |
| • |
 |
More info ›› |
| |
| • |
 Included are jets from 46 to 54 in a storage block. |
More info ›› |
| |
| • |
 One very important part of fuel delivery. |
More info ›› |
| |
| • |
 Effective sealing at the exhaust port. |
More info ›› |
| |
| • |
 Use with confidence... |
More info ›› |
| |
| • |
 This fits between the carb & the block. |
More info ›› |
| |
| • |
 |
More info ›› |
| |
| • |
 Each box contains 96 links (about 3' in length). This is manufactured by EK, a leader in quality roller chain production. |
More info ›› |
| |
| • |
 D.I.D. 219 Gold Hi-Performance Kart Racing Chain, 114 links. |
More info ›› |
| |
| • |
|
More info ›› |
| |
| • |
 |
More info ›› |
| |
| • |
 The universal clutch puller removes both long & short nose clutches. Counterbored to accept crankshaft end on short nose clutches. Extra long oversized screw. Zink plated for corrosion resistance. Undercut to prevent damage to clutch threads. |
More info ›› |
| |
| • |
|
More info ›› |
| |
| • |
 This is for closed end filters. |
More info ›› |
| |
| • |
 The “long arm” Magneto Rotor Puller allows easy removal of the Yamaha magneto rotor. One tool does the work of a rotor holder AND a rotor puller! The handle extension prevents the tool from rotating during use. Brightly Zinc plated for years of hard use. Comes with extra long screws. |
More info ›› |
| |
| • |
|
More info ›› |
| |
| • |
 "Designed specifically for holding Yamaha TCI ignition units in place, the Fast Karts TCI Hold Down prevents broken hold down ears. This is made of 6061-T6 aluminum." |
More info ›› |
| |
| • |
 "The Special TCI Hold Down features a fully finned heat sink top for added cooling, made from 6061-T6 aluminum. Flow through design allows complete air circulation. The Special TCI Hold Down is polished and anodized Racing Red. Fits Yamaha engines." |
More info ›› |
| |
| • |
 "The Fast Karts Yamaha Magneto Nut is a direct replacement for the Steel Yamaha Nut. The aluminum nut provides a lightweight replacement for its heavier steel counter part (a 65% reduction in weight), enabling faster RPM recovery." |
More info ›› |
| |
